Frequency Signal Distribution Amplifier
1) Supports two input signals with seamless manual or automatic switching
2) Provides multiple high-quality frequency outputs
3) Indicates operating status and controls input switching through the front panel
4) Reports operating status and alarms every second through the communication interface and receives control commands, enabling real-time reporting and monitoring of equipment status and measurement data
Optional input selection controlled by an external DC level signal
|
Parameter |
Standard Configuration |
Optional Configuration | |
|
Input Signal Type |
10 MHz |
Option 1 |
1 MHz |
|
Option 2 |
5 MHz | ||
|
Option 3 |
100 MHz | ||
|
Number of Input Channels |
2 channels |
1 channel | |
|
Input Signal Amplitude |
7 ± 1 dBm |
5~13 dBm | |
|
Parameter |
Standard Configuration |
Optional Configuration | |
|
Signal Type |
10 MHz |
Option 1 |
1 MHz |
|
Option 2 |
5 MHz | ||
|
Option 3 |
100 MHz | ||
|
Number of Channels |
16 channels |
Customizable; total not exceeding 20 channels | |
|
Signal Amplitude |
Input signal amplitude ± 1 dBm |
(input signal amplitude +3)± 1 dBm | |
|
Output Impedance |
Can drive a 50 Ω load | ||
|
Residual frequency stability |
≤3.0E-13/1s |
≤3.0E-14/1s | |
|
Residual phase noise |
≤-115 dBc/Hz@1 Hz |
≤-120 dBc/Hz@1 Hz | |
|
Harmonic distortion |
≤-40 dBc |
- | |
|
Non-harmonic distortion |
≤-80 dBc |
- | |
|
Parameter |
Standard Configuration |
Optional Configuration |
|
Output phase consistency before and after input switching |
≤1 ns |
≤300 ps |
|
Output signal phase consistency |
- |
≤300 ps |
附件下载：
